Scotts S1742 Instrukcja Operatora

Przeglądaj online lub pobierz Instrukcja Operatora dla Pojazd użytkowy Scotts S1742. Scotts S1742 Operator`s manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - OPERATOR’S MANUAL

OMGX10784 C0C0Scotts Lawn Tractors S1642, S1742, and S2046OPERATOR’S MANUALNorth American VersionLitho in U.S.A.

Strona 2 - Warning:

Operating Machine - 6OPERATING MACHINEAvoid Tipping• DO NOT drive where machine could slip or tip.• Stay alert for holes and other hidden hazards in t

Strona 3 - PRODUCT IDENTIFICATION

Operating Machine - 7OPERATING MACHINEPicture Note: Model with capscrew adjuster used for illustration.2. Loosen two cap screws (A) two turns. 3. Slid

Strona 4 - ASSEMBLY

Operating Machine - 8OPERATING MACHINE1. Gear units - Move transmission shift lever (A) to N (NEUTRAL) position.Automatic units - If equipped with sh

Strona 5

Operating Machine - 9OPERATING MACHINEStopping Engine1. Push down on foot pedal (A).2. Gear units - Move transmission shift lever (B) to N (NEUTRAL)

Strona 6 - SAFETY SIGNS

Operating Machine - 10OPERATING MACHINETo Travel Forward:1. Units with Shift Lever (A) - Move transmission shift lever (A) to the right and forward.

Strona 7

Operating Machine - 11OPERATING MACHINEENGAGE CRUISE CONTROL:1. Start with the cruise control lever (A) in the OFF position.2. Move cruise control lev

Strona 8 - CONTROLS

Operating Machine - 12OPERATING MACHINEPushing MachineTo move machine when engine is STOPPED:• Unlock the park brake (A).• GEAR MODEL: Put transmissio

Strona 9

Operating Machine - 13OPERATING MACHINETest 21. Operator on seat.2. Lock the park brake.3. Push PTO lever (A) forward to ENGAGE.4. Try to start engine

Strona 10 - OPERATING MACHINE

Operating Machine - 14OPERATING MACHINE3. Pull PTO lever (A) back to DISENGAGE.4. Start engine and move throttle lever (B) to FAST (r) speed position.

Strona 11

Operating Machine - 15OPERATING MACHINE2. Push PTO lever (A) forward to ENGAGE.3. Look behind the vehicle to be sure there are no bystanders.4. Begin

Strona 12

IntroductionINTRODUCTIONIntroductionTHANK YOU for purchasing a Scotts product.Read this manual and your attachment manual thoroughly. Failure to do so

Strona 13

Operating Mower - 16OPERATING MOWEROperating MowerOperate Mower Safely• In addition to reading your Operator’s Manual, view your Mowing Safety Video.C

Strona 14

Operating Mower - 17OPERATING MOWER4. Adjust gage wheels to match cut height desired. (See Adjusting Mower Gage Wheels below.)Adjusting Mower Gage Whe

Strona 15

Operating Mower - 18OPERATING MOWER7. Loosen top clamping nut (C) facing inside of mower, on left hand side J-bolt (B), approximately one turn.8. Loos

Strona 16

Operating Mower - 19OPERATING MOWER2. Move throttle lever (A) to the FAST (r) position.3. Lower mower to cutting height.4. Push PTO drive lever (B) fo

Strona 17

Operating Mower - 20OPERATING MOWERTo set-up and operate the 42” deck for side discharge operation the factory installed mulch cover (A) must be remov

Strona 18

Operating Mower - 21OPERATING MOWER(A) must be removed.1. Remove mulch cover:• Lift plastic discharge chute.• Grasp corner of steel chute, pull outwar

Strona 19

Replacement Parts - 22REPLACEMENT PARTSReplacem ent PartsService LiteratureIf you would like a copy of the Parts Catalog or Technical Manual for this

Strona 20 - OPERATING MOWER

Replacement Parts - 23REPLACEMENT PARTSParts for 42-Inch Mower DeckParts for 46-Inch Mower Deck(Part numbers are subject to change without notice. Par

Strona 21

Service Machine Safely - 24SERVICE MACHINE SAFELYService Machine SafelyPractice Safe Maintenance• Understand service procedure before doing work. Keep

Strona 22

Service Interval Chart - 25SERVICE INTERVAL CHARTService Interval ChartService IntervalsPlease use the following timetables to perform routine mainten

Strona 23

Product IdentificationPRODUCT IDENTIFICATIONProduct IdentificationRecord Identification NumbersScott’s Lawn TractorsS1642, S1742, and S2046 PIN (02000

Strona 24

Service Interval Chart - 26SERVICE INTERVAL CHARTService RecordDATE SERVICE PERFORMED

Strona 25

Service Engine - 27SERVICE ENGINEService EngineEngine Warranty Maintenance StatementMaintenance, repair, or replacement of the emission control device

Strona 26 - REPLACEMENT PARTS

Service Engine - 28SERVICE ENGINE1. Park tractor on a level surface. STOP engine. Let engine cool.2. Lift hood.3. Clean area around dipstick to preven

Strona 27

Service Engine - 29SERVICE ENGINEcloth.8. Lightly oil filter gasket with fresh, clean oil.9. Install replacement oil filter. Turn oil filter to the ri

Strona 28 - SERVICE MACHINE SAFELY

Service Engine - 30SERVICE ENGINE9. Remove and replace filter element (C) ONLY if damaged or very dirty:• S1642 Only - Remove rubber tube sleeve (D1).

Strona 29 - SERVICE INTERVAL CHART

Service Engine - 31SERVICE ENGINEonto precleaner. Squeeze precleaner to distribute oil evenly. Squeeze out excess oil with a clean cloth.7. Inspect ca

Strona 30

Service Engine - 32SERVICE ENGINENOTE: Change filter when fuel is low in fuel tank.1. Park tractor on a level surface.2. STOP engine. LOCK park brake.

Strona 31 - SERVICE ENGINE

Service Steering and Brakes - 33SERVICE STEERING AND BRAKESService Steering and BrakesGreaseUse grease based on the expected air temperature range dur

Strona 32

Service Steering and Brakes - 34SERVICE STEERING AND BRAKES• Brake disc (A) is contacting the case (B),AND/OR• Brake lever (C) is contacting its mount

Strona 33

Service Steering and Brakes - 35SERVICE STEERING AND BRAKES4. If distance is less than or equal to 2 mm (0.08 in):• Gradually adjust jam nuts (D) unti

Strona 34

Assembly - 0ASSEMBLYAssemblyIdentify PartsConnect and Check BatteryNOTE: Do not remove the BLACK negative (–) protective cap at this time.1. Remove an

Strona 35

Service Mower - 36SERVICE MOWERService MowerAvoid Injury From Contacting BladesMower SpindlesReplacing Mower Drive Belt1. STOP engine, LOCK park brake

Strona 36

Service Mower - 37SERVICE MOWER1. Park tractor on a hard, level surface.2. Stop the engine, remove key, wait for moving parts to stop.3. Place mower d

Strona 37 - SERVICE STEERING AND BRAKES

Service Mower - 38SERVICE MOWER7. Measure distance from brake surface (A) to pulley braking surface (B). Brake to Pulley Distance should be: 2 – 3 mm

Strona 38

Service Mower - 39SERVICE MOWERINSTALLING MOWER BLADES1. Lightly lubricate cap screw threads with a general purpose grease or oil. This lubrication is

Strona 39

Service Mower - 40SERVICE MOWERSharpening Blades1. Sharpen blades with grinder, hand file or electric blade sharpener.2. Keep original bevel (A) when

Strona 40 - SERVICE MOWER

Service Electrical - 41SERVICE ELECTRICALService ElectricalChecking the Battery•Keep battery and terminals clean.•Keep battery bolts tight.•Keep small

Strona 41

Service Electrical - 42SERVICE ELECTRICAL2. Remove rubber hold-down strap (A).3. Disconnect BLACK (–) battery cable (B) first. 4. Disconnect RED (+) b

Strona 42

Service Electrical - 43SERVICE ELECTRICAL2. Connect positive (+) charger cable to positive (+) battery terminal.3. Connect negative (–) charger cable

Strona 43

Service Electrical - 44SERVICE ELECTRICAL2. Push in and turn bulb socket (A) 1/4 turn counterclockwise to remove.3. Replace defective bulb with a new

Strona 44

Service Miscellaneous - 45SERVICE MISCELLANEOUSService M iscellaneousChecking Tire Pressure1. Check tires for damage.2. Check tire pressure with an ac

Strona 45 - SERVICE ELECTRICAL

Assembly - 1ASSEMBLYChecking Tire Pressure1. Check tires for damage.2. Check tire pressure with an accurate gauge.3. Add or remove air, if necessary:c

Strona 46

Service Miscellaneous - 46SERVICE MISCELLANEOUSUsing Clean FuelsDirt in the fuel system is a major cause of performance problems. Be sure to clean any

Strona 47

Service Miscellaneous - 47SERVICE MISCELLANEOUS4. Remove fuel tank cap (A).5. Fill tank with fresh fuel only to bottom of filler neck.6. Install fuel

Strona 48

Service Miscellaneous - 48SERVICE MISCELLANEOUS2. Use paint stick with factory-matched colors available from your John Deere dealer to fill scratches.

Strona 49 - SERVICE MISCELLANEOUS

Removing Mower - 49REMOVING MOWERRemoving MowerRemoving Mower1. STOP engine, LOCK park brake, DISENGAGE PTO lever, turn key to the OFF position, and r

Strona 50

Removing Mower - 50REMOVING MOWER8. Remove spring locking pins and rear draft pins (I), one on each side, from rear draft brackets (J).9. Raise mower

Strona 51

Installing Mower - 51INSTALLING MOWERInstalling MowerInstalling Mower 1. STOP engine, LOCK park brake, DISENGAGE PTO lever, turn key to the OFF positi

Strona 52

Installing Mower - 52INSTALLING MOWER12.Raise tension rod (N) and attach to blade drive arm (O) using flat washer (P) and spring locking pin (Q). 13.R

Strona 53 - REMOVING MOWER

Troubleshooting - 53TROUBLESHOOTINGTroubleshootingUsing Troubleshooting ChartIf you are experiencing a problem that is not listed in this chart, see y

Strona 54

Troubleshooting - 54TROUBLESHOOTINGLoss of power Cutting too much grass /too fast.Throttle in “CHOKE” position.Buildup of grass, leaves and trash unde

Strona 55 - INSTALLING MOWER

Troubleshooting - 55TROUBLESHOOTINGMowerIF CHECKMower blades will not rotate Obstruction in clutch mechanism, or blades.Worn/damaged mower drive belt.

Strona 56

Safety Signs - 2SAFETY SIGNSSafety SignsSafety-Alert SymbolRead and recognize safety information. Be alert to the potential for personal injury when y

Strona 57 - TROUBLESHOOTING

Troubleshooting - 56TROUBLESHOOTINGElectricalGrass Tips Are Jagged And Turn Grayish Brown After MowingDull mower blades.Bent blades.Front-to-rear bla

Strona 58

Storing Machine - 57STORING MACHINEStoring MachineStoring SafelyPreparing Machine for Storage1. Repair any worn or damaged parts. Replace parts if nec

Strona 59

Storing Machine - 58STORING MACHINE7. Clean the engine and engine compartment.8. Remove battery.9. Clean the battery and battery posts. NOTE: The stor

Strona 60

Specifications - 59SPECIFICATIONSSpecificationsModel S1642Engine Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strona 61 - STORING MACHINE

Specifications - 60SPECIFICATIONSHorsepower (SAE1349) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strona 62

Specifications - 61SPECIFICATIONSTire Pressure (Front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strona 63 - SPECIFICATIONS

Warranty - 62WARRANTYWarrantyLIMITED WARRANTY FOR NEW SCOTTS BRAND PRODUCTSManufactured by John Deere(U.S. Only)A. GENERAL PROVISIONS - The warranties

Strona 64

Warranty - 63WARRANTYavailable to the dealer or service center within a reasonable period of time.E. LIMITATION OF IMPLIED WARRANTIES AND OTHER REMEDI

Strona 65

Warranty - 64WARRANTYAir Induction System:• Air Cleaner• Intake manifold.Ignition System:• Spark plugs.• Magneto or electronic ignition system.• Spark

Strona 66 - WARRANTY

Warranty - 65WARRANTYA. Breakage of the container, cover, or terminals. B. Depreciation or damage caused by lack of reasonable and necessary maintenan

Strona 67

Safety Signs - 3SAFETY SIGNSMOWER WHEN ENGINE IS RUNNINGTHROWN OBJECTSBEFORE MOWING, CLEAR AREA OF OBJECTS THAT MAY BE THROWN BY BLADEDO NOT OPERATE M

Strona 68

Index - 66INDEXIndexAAir Cleaner Elements - S2046 ... 30Air Cleaner Elements, Checking and Cleaning - S1642 and S

Strona 69

Index - 67INDEXRemoving Mower ... 49Reverse Implement Option, Using ...

Strona 70

Quality Statement - 68QUALITY STATEMENTQuality StatementPlease do not return this tractor to the store where you purchased it.Your Scotts tractor, des

Strona 71

Controls - 4CONTROLSControlsTractor Controls - Gear A - Throttle/Choke Control B - Foot Pedal - Brake/ClutchC - Reverse Implement Option SwitchD - Att

Strona 72 - QUALITY STATEMENT

Operating Machine - 5OPERATING MACHINEOperating MachineOperate Safely• In addition to reading your Operator’s Manual, view your Mowing Safety Video.•

Komentarze do niniejszej Instrukcji

Brak uwag